Safety Instructions Of Scissor Lift Table

scissor lift table single-3

Follow all safety instructions strictly.

1.It is necessary to check all safety devices before operation.

2.Make sure that there are no obstacles in the working area.

3.Do not put foot or hand in scissors mechanism or through frame.

4.Screw the lifting eyes on the base frame before working on the lift table.

5.Do not overload the lift table. Load should be distributed on the table according to relevant load distribution chart.

6.Pay attention if local voltage and frequency is as same as the input specification of the lift table.

7.Use the lift table on flat and solid ground.

8.All the electrical connection and disconnection operations must be carried out by skilled and competent personal.